Nora Lighting NT-2304WA 8 Ft. Two-Circuit Track, 120V, 2400W Per Circuit, White

Features
• Low profile, extruded aluminum track with 20-Amp rated flat, solid integral conductors
• Variety of connectors and accessory parts available
• Note: Nora Track is not approved for use with remote transformers. Low voltage fixtures require a transformer for each fixture, can be purchased as a separate item or a fixture with transformer included.

Specification
• Extrusion: 0.030 die cast aluminum construction with 0.045 PVC insulators holding 12-gauge flat conductor wiring. Polarity groove is located on face of track to indicate location of grounding conductor.
• Polarity Groove: Each track section includes a groove on the surface of the extrusion. This groove must be continous throughout the track run. Track heads also have a polarity groove, which must coincide with the track's polarity groove.
• Mounting: The track may be surface, stem, or cable mounted. All lengths of track can be field cut. Surface mounting hardware included with each track section.
• Compatibility: Nora track system is compatible with Halo, Catalina, Hampton Bay, Halo-Edison, or any other brand configured to Halo 3-wire track configuration. Note: Wands and monopoint canopies are generally not compatible with other manufacturers.

Electrical
• Input Voltage: 120V
• Wattage: 2400W each circuit
• Dimming: Nora track may be dimmed with any approved incandescent, magnetic low voltage, or electronic low voltage controls, depending on the track fixtures being used. If using two dimming switches on NT-2300 two-circuit track, only apply a single phase neutral to the shared common wire on the track rail. Do not attempt to use 3-way or multi-phase neutral if dimming.

Listing
• cULus Listed for Dry Locations

For more information, Click Here - PDF

For installation instructions, Click Here - PDF
Please contact us for any additional options seen on specification sheet.