PICTURE MAY NOT REPRESENT ACTUAL ITEM FINISH. PLEASE REFER TO PRODUCT DESCRIPTION.
Housing and Lens Frame
• Die-cast, low copper alloy (<0.6% Cu) aluminum
• Frame with silicone gasket, attaches to housing with four captive J-20 stainless steel slotted cap screws
Arm
• Cast aluminum
• Head is independently rotatable 300° vertically from top dead center
• Head may be positioned straight up
• Horizontal rotation of entire fixture controlled by installation on mounting device
• Set screw provided for locking position
Stem
• K" schedule 40 aluminum pipe with K" NPT at bottom plus solid brass locknut for mounting
Lens
• Tempered clear soda lime glass with silicone gasket
• Flush with lens frame to promote water runoff when positioned upward
Wiring
• No. 18AWM rated 105°C
Finish
• Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating
• 2500 hour salt spray test endurance rating
Driver
• Universal Voltage from 120 to 277V with a +/- 10% tolerance
• -40°F starting temperature
• All drivers are Underwriters Laboratories recognized
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
Housing and Lens Frame
• Die-cast, low copper alloy (<0.6% Cu) aluminum
• Frame with silicone gasket, attaches to housing with four captive J-20 stainless steel slotted cap screws
Arm
• Cast aluminum
• Head is independently rotatable 300° vertically from top dead center
• Head may be positioned straight up
• Horizontal rotation of entire fixture controlled by installation on mounting device
• Set screw provided for locking position
Stem
• K" schedule 40 aluminum pipe with K" NPT at bottom plus solid brass locknut for mounting
Lens
• Tempered clear soda lime glass with silicone gasket
• Flush with lens frame to promote water runoff when positioned upward
Wiring
• No. 18AWM rated 105°C
Finish
• Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating
• 2500 hour salt spray test endurance rating
Driver
• Universal Voltage from 120 to 277V with a +/- 10% tolerance
• -40°F starting temperature
• All drivers are Underwriters Laboratories recognized
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
