PICTURE MAY NOT REPRESENT ACTUAL ITEM FINISH. PLEASE REFER TO PRODUCT DESCRIPTION.
Features
• Construction: Cast brass brick light. Stamped stainless steel mounting bracket - no back box required
• Lens: Clear acrylic; creates bright 3000K halogen like color
• Gasket: Black neosponge closed cell; .190" thickness
• Light source: 12V, 8W integrated LED flat panel with external driver, warm white 3000K
• Lifetime rating: 50,000 hours
• Socket: None
• Driver: 8W output, 12V AC input. Maximum distance from fixture is 18 feet. For use with magnetic transformers only
• Voltage Range: 9 to 18 volts. Optimum operating range of 10 to 15 volts for consistent performance and brightness
• Wiring: Red(+) and Black(-) 18 gauge zip cord from LED panel. Connects to external driver Red(+) and Black(-) 18 gauge zip cord. Additional 6' 18/2 zip cord supplied for wiring external driver to main cable
• Connection: FA-05 Quick Connector (not supplied) from LED driver to main cable (12/2, 10/2 or 8/2 only)
• Mounting: Stainless Steel surface mount bracket; two screws and wall anchors provided. Face plate attaches to bracket with two provided set screws
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
Features
• Construction: Cast brass brick light. Stamped stainless steel mounting bracket - no back box required
• Lens: Clear acrylic; creates bright 3000K halogen like color
• Gasket: Black neosponge closed cell; .190" thickness
• Light source: 12V, 8W integrated LED flat panel with external driver, warm white 3000K
• Lifetime rating: 50,000 hours
• Socket: None
• Driver: 8W output, 12V AC input. Maximum distance from fixture is 18 feet. For use with magnetic transformers only
• Voltage Range: 9 to 18 volts. Optimum operating range of 10 to 15 volts for consistent performance and brightness
• Wiring: Red(+) and Black(-) 18 gauge zip cord from LED panel. Connects to external driver Red(+) and Black(-) 18 gauge zip cord. Additional 6' 18/2 zip cord supplied for wiring external driver to main cable
• Connection: FA-05 Quick Connector (not supplied) from LED driver to main cable (12/2, 10/2 or 8/2 only)
• Mounting: Stainless Steel surface mount bracket; two screws and wall anchors provided. Face plate attaches to bracket with two provided set screws
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
