Features
• Double wall IC construction, for use in insulated ceilings
• Lamp: 50W max 12V MR16 GU/GX5.3 bi-pin (not included)
• Lamp Holder: MR16 GU/GX5.3 bi-pin socket
Construction
• Double wall IC rated for direct contact with insulation, for use in IC or non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Steel housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller joists are used
• High strength hanger bars can easilty be nailed to joists
• Maximum hole cutout is 4 1/4"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots
• 4 Romex pryouts with strain relief
Hanger Bars
• Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams
• Integral T-bar slots for easy installation in T-bars
• Spans up to 24" and can be repositioned 90°
• Score lines allow for tool-free hanger bar size reduction
• Integral leveling flange allows for single-person installation while aligning the housings with the joists
Electrical
• Input Voltage: 120V AC
• Output Voltage: 12V AC
• Thermally protected against improper lamping
Trims
• Compatible with Elco 4" MR16 trims
Dimmability
• Magnetic transformer dims with MLV type dimmers
Lamp
• 50W max 12V MR16 GU/GX5.3 bi-pin
• EL1499ICA magnetic transformer recommended for use with 20-50W lamps only
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Double wall IC construction, for use in insulated ceilings
• Lamp: 50W max 12V MR16 GU/GX5.3 bi-pin (not included)
• Lamp Holder: MR16 GU/GX5.3 bi-pin socket
Construction
• Double wall IC rated for direct contact with insulation, for use in IC or non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Steel housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller joists are used
• High strength hanger bars can easilty be nailed to joists
• Maximum hole cutout is 4 1/4"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots
• 4 Romex pryouts with strain relief
Hanger Bars
• Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams
• Integral T-bar slots for easy installation in T-bars
• Spans up to 24" and can be repositioned 90°
• Score lines allow for tool-free hanger bar size reduction
• Integral leveling flange allows for single-person installation while aligning the housings with the joists
Electrical
• Input Voltage: 120V AC
• Output Voltage: 12V AC
• Thermally protected against improper lamping
Trims
• Compatible with Elco 4" MR16 trims
Dimmability
• Magnetic transformer dims with MLV type dimmers
Lamp
• 50W max 12V MR16 GU/GX5.3 bi-pin
• EL1499ICA magnetic transformer recommended for use with 20-50W lamps only
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
