Features
• No heads to aim, no adjustments to make
• Includes Spectron self-testing/self-diagnostic electronics with time-delay retransfer (TDR) standard
• Sturdy die-cast aluminum construction
• Time delay retransfer circuit
• Brownout detection circuit
• Low Voltage Battery Disconnect
• Universal 120/277 VAC operation
• 90 minute emergency operation
• Microprocessor controlled battery environmental chamber
• Fast, easy installation
Application
• The PG is an indoor/outdoor, die-cast architectural emergency unit
• Wet location listed, emergency luminaire with high-output LED technology that provides path of egress illumination for mounting over entrance/exit ways and perimeter walkways
• Spectron self-testing/self-diagnostic electronics are included standard
Construction
• Housing and mounting plate are constructed of 0.125" die-cast aluminum and 0.125" closed-cell, medium density, neoprene gasket
• The acrylic lens allows 92% light transmission
• The reflector is electropolished aluminum with 95% reflectance
• Housing finish is powder coated electro-deposition paint
Installation
• Universal housing knockouts for mounting to standard 31/2" and 4" octagon and 4" square electrical boxes
• A 1/2" - 1/4 NPT threaded conduit opening is provided at the top of the housing and sealed with a closure plug
• The back plate mounts to the wall surface using installer supplied hardware
• The housing "snaps" to the back plate by a "pin and socket" arrangement, and is secured with two Fillister head screws
• AC Lockout feature prevents battery discharge prior to initial unit power-up saving installation time
Compliances
• UL 924 Listed (emergency models only)
• UL Wet Location Listed
• NFPA 101 Life Safety Code
• NFPA 70 National Electrical Code
• OSHA
• U.S. Patent No. D627,916
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• No heads to aim, no adjustments to make
• Includes Spectron self-testing/self-diagnostic electronics with time-delay retransfer (TDR) standard
• Sturdy die-cast aluminum construction
• Time delay retransfer circuit
• Brownout detection circuit
• Low Voltage Battery Disconnect
• Universal 120/277 VAC operation
• 90 minute emergency operation
• Microprocessor controlled battery environmental chamber
• Fast, easy installation
Application
• The PG is an indoor/outdoor, die-cast architectural emergency unit
• Wet location listed, emergency luminaire with high-output LED technology that provides path of egress illumination for mounting over entrance/exit ways and perimeter walkways
• Spectron self-testing/self-diagnostic electronics are included standard
Construction
• Housing and mounting plate are constructed of 0.125" die-cast aluminum and 0.125" closed-cell, medium density, neoprene gasket
• The acrylic lens allows 92% light transmission
• The reflector is electropolished aluminum with 95% reflectance
• Housing finish is powder coated electro-deposition paint
Installation
• Universal housing knockouts for mounting to standard 31/2" and 4" octagon and 4" square electrical boxes
• A 1/2" - 1/4 NPT threaded conduit opening is provided at the top of the housing and sealed with a closure plug
• The back plate mounts to the wall surface using installer supplied hardware
• The housing "snaps" to the back plate by a "pin and socket" arrangement, and is secured with two Fillister head screws
• AC Lockout feature prevents battery discharge prior to initial unit power-up saving installation time
Compliances
• UL 924 Listed (emergency models only)
• UL Wet Location Listed
• NFPA 101 Life Safety Code
• NFPA 70 National Electrical Code
• OSHA
• U.S. Patent No. D627,916
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
