Electrical Specifications:
• Voltage input 120/240/277 VAC
• Low-voltage disconnect
• Brownout circuit
• Overload/short circuit protection
• Test switch/power indicator light
• Fully recharged in 24 hours
• Self-diagnostics standard on self-powered versions
Housing Construction:
• Die cast aluminum housing
• Die cast canopy included (for mounting convenience only - no electrical components in canopy)
• Universal pattern knockouts on rear of single face housing for direct mounting to junction box
• Exit can be universally mounted ceiling, wall or end
• Painted finish
• NFPA 101 compliant knockout chevrons allow quick conversion to directional signs
• UV stable clear, polycarbonate, vandal resistant shield with Torx head tamperproof screws, stainless steel
• Knockouts provided for 1/2" conduit entry
Lamp Data:
• LED lamp provides uniform light output
• Red and green lettering
• Field configurable
Code Compliance:
• UL 924, Outdoor Wet Location Listed (suitable for wet and damp locations)
• UL50, NEMA 4X
• UL844, Hazardous Locations (Class I, Division 2, Groups A, B, C, D)
• HAZ LOCATION CODE T6 with HAZ Connection
• Life Safety NFPA 101
• NEC/OSHA
• Most State and Local Codes
• Suitable for Floor Proximity Installation, UL Listed, ADA (American Disabilities Act)
• NSF, National Sanitation Foundation/Splash Zone (for Food Processing)
• IP66, Ingress Protection from IEC (International Electrical Commission)
• Cleanrooms Class 10,000
• Meets New York City Exit construction code
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Voltage input 120/240/277 VAC
• Low-voltage disconnect
• Brownout circuit
• Overload/short circuit protection
• Test switch/power indicator light
• Fully recharged in 24 hours
• Self-diagnostics standard on self-powered versions
Housing Construction:
• Die cast aluminum housing
• Die cast canopy included (for mounting convenience only - no electrical components in canopy)
• Universal pattern knockouts on rear of single face housing for direct mounting to junction box
• Exit can be universally mounted ceiling, wall or end
• Painted finish
• NFPA 101 compliant knockout chevrons allow quick conversion to directional signs
• UV stable clear, polycarbonate, vandal resistant shield with Torx head tamperproof screws, stainless steel
• Knockouts provided for 1/2" conduit entry
Lamp Data:
• LED lamp provides uniform light output
• Red and green lettering
• Field configurable
Code Compliance:
• UL 924, Outdoor Wet Location Listed (suitable for wet and damp locations)
• UL50, NEMA 4X
• UL844, Hazardous Locations (Class I, Division 2, Groups A, B, C, D)
• HAZ LOCATION CODE T6 with HAZ Connection
• Life Safety NFPA 101
• NEC/OSHA
• Most State and Local Codes
• Suitable for Floor Proximity Installation, UL Listed, ADA (American Disabilities Act)
• NSF, National Sanitation Foundation/Splash Zone (for Food Processing)
• IP66, Ingress Protection from IEC (International Electrical Commission)
• Cleanrooms Class 10,000
• Meets New York City Exit construction code
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
