Features:
• Converts standard LED fixtures to emergency fixtures with 90 minutes of run time
• 20 watts of emergency power equals up to 2600 lumens of illumination during power outage
• UL1310 and CSA 22.2 damp location listed for both factory or field installation
• Compatible with LED products with 20 to 50 VDC operation
Specificaions:
• Illumination Time: Minimum 90 Minutes
• Initial Light Output: Up to 2600 Lumens
• Universal Input Voltage: 120-277 VAC, 50/60 Hz
• AC Input Power Voltage: 8.5 W Maximum
• Output Current and Voltage: 1A-0.50A 20V-50V (Class 2)
• Output Power: 20 W (initial)
• Test Switch/Charging Indicator Light: Test Button Indicator Light (TBIL)
• Battery: High-Temperature, Maintenance-Free; Nickel-Cadmium Battery; 7- to 10-Year Life Expectancy
• Recharge Time: 24 Hours
• Temperature Rating: Ambient: 0°C to +50°C (32°F to 122°F); Case: Tc (max): 65°C
Installation:
• The EBPLEDC1 does not affect normal fixture operation and may be used with either a switched or unswitched fixture.
• If a switched fixture is used, an unswitched hot lead must be connected to the emergency driver.
• The emergency driver must be fed from the same branch circuit as the AC driver.
• Installation is not recommended with fixtures where the ambient temperature may fall below 0° C.
Operation:
• It operates at a reduced lumen output for a minimum of 90 minutes.
• When AC power fails, the EBPLEDC1 immediately switches to the emergency mode.
• As soon as the AC power is restored, the emergency driver automatically returns to the charging mode.
• Compatible with LED products with 20 to 50 VDC operation.
Emergency Illumination:
• The EBPLEDC1 operates an LED load of up to 20.0 W at nominal battery voltage for a minimum of 90 minutes.
Application:
• EBPLEDC1 is UL Listed and can be used for normal and emergency options.
• Suitable for Indoor and Damp Locations.
Compliance:
• T20 Compliant.
• ROHS Compliant.
• UL1310 and CSA 22.2 damp location listed for both factory or field installation.
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Converts standard LED fixtures to emergency fixtures with 90 minutes of run time
• 20 watts of emergency power equals up to 2600 lumens of illumination during power outage
• UL1310 and CSA 22.2 damp location listed for both factory or field installation
• Compatible with LED products with 20 to 50 VDC operation
Specificaions:
• Illumination Time: Minimum 90 Minutes
• Initial Light Output: Up to 2600 Lumens
• Universal Input Voltage: 120-277 VAC, 50/60 Hz
• AC Input Power Voltage: 8.5 W Maximum
• Output Current and Voltage: 1A-0.50A 20V-50V (Class 2)
• Output Power: 20 W (initial)
• Test Switch/Charging Indicator Light: Test Button Indicator Light (TBIL)
• Battery: High-Temperature, Maintenance-Free; Nickel-Cadmium Battery; 7- to 10-Year Life Expectancy
• Recharge Time: 24 Hours
• Temperature Rating: Ambient: 0°C to +50°C (32°F to 122°F); Case: Tc (max): 65°C
Installation:
• The EBPLEDC1 does not affect normal fixture operation and may be used with either a switched or unswitched fixture.
• If a switched fixture is used, an unswitched hot lead must be connected to the emergency driver.
• The emergency driver must be fed from the same branch circuit as the AC driver.
• Installation is not recommended with fixtures where the ambient temperature may fall below 0° C.
Operation:
• It operates at a reduced lumen output for a minimum of 90 minutes.
• When AC power fails, the EBPLEDC1 immediately switches to the emergency mode.
• As soon as the AC power is restored, the emergency driver automatically returns to the charging mode.
• Compatible with LED products with 20 to 50 VDC operation.
Emergency Illumination:
• The EBPLEDC1 operates an LED load of up to 20.0 W at nominal battery voltage for a minimum of 90 minutes.
Application:
• EBPLEDC1 is UL Listed and can be used for normal and emergency options.
• Suitable for Indoor and Damp Locations.
Compliance:
• T20 Compliant.
• ROHS Compliant.
• UL1310 and CSA 22.2 damp location listed for both factory or field installation.
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
