Electrical Specifications:
• Dual voltage input 120/277VAC, 60Hz
• Line-latching
• Solid-state voltage limited charger
• Solid-state switching
• Brownout protection
• Low voltage disconnect
• Overload/short circuit protection
• Test switch/power indicator light
• High Power Combo capable of running two additional LED remote heads
• 3.6V, .78W DC long lasting LED heads
Housing Construction:
• All components are injection molded, color stable, high impact polycarbonate material
• Components are of snap-fit construction to facilitate under 5-minute installation
• Reinforcing ribs throughout to provide maximum strength
• Molded-in wireways facilitate internal wire routing and connections
• All components including battery and electronics are located inside the exit housing
• Snap-out or snap-in chevron directional indicators have full 3/4" stroke
• Universal exits can be field configured as single face or double face
• Snap-fit canopy with captive mounting screws included with all exits
• Exit can be ceiling, wall, or end mounted
• Universal J-box mounting pattern
• Operating temperature range 10°C to 40°C
Battery:
• Sealed nickel cadmium
• Maintenance free, long life
• Full recharge time: 24 hrs (max.)
Code Compliance:
• UL 924 Listed
• UL Damp Location Listed
• Life Safety NFPA 101
• NEC/OSHA
• California Energy Code compliant
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Dual voltage input 120/277VAC, 60Hz
• Line-latching
• Solid-state voltage limited charger
• Solid-state switching
• Brownout protection
• Low voltage disconnect
• Overload/short circuit protection
• Test switch/power indicator light
• High Power Combo capable of running two additional LED remote heads
• 3.6V, .78W DC long lasting LED heads
Housing Construction:
• All components are injection molded, color stable, high impact polycarbonate material
• Components are of snap-fit construction to facilitate under 5-minute installation
• Reinforcing ribs throughout to provide maximum strength
• Molded-in wireways facilitate internal wire routing and connections
• All components including battery and electronics are located inside the exit housing
• Snap-out or snap-in chevron directional indicators have full 3/4" stroke
• Universal exits can be field configured as single face or double face
• Snap-fit canopy with captive mounting screws included with all exits
• Exit can be ceiling, wall, or end mounted
• Universal J-box mounting pattern
• Operating temperature range 10°C to 40°C
Battery:
• Sealed nickel cadmium
• Maintenance free, long life
• Full recharge time: 24 hrs (max.)
Code Compliance:
• UL 924 Listed
• UL Damp Location Listed
• Life Safety NFPA 101
• NEC/OSHA
• California Energy Code compliant
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
