Skip to main content

Nora Lighting NUDTW-8811/23345BZ 11" LEDUR 120V Edge-Lit LED Undercabinet Light, 7W, Selectable CCT and Lumen Output, Bronze

Nora Lighting

$62.28
(No reviews yet) Write a Review
UPC:
732180229079
Color:
Bronze
10% OFF COUPON CODE:
NORA10
Adding to cart… The item has been added
LEDUR LED Under cabinet luminaires include two switches to change the color temperature and lumen output. Five color temperature options and two lumen outputs creates ten different fixtures in one! Color temperature options range from 2700K, 3000K, 3500K, 4000K or 5000K @ 90 CRI. Luminaires produces an 275 lumens or 475 lumens average per foot. LEDUR uniform reflectance is excellent when used under cabinet over granite, polished stone or any reflective surface, additionally it is excellent in retail display lighting where diode image might distract from display merchandise.

Features
• Ten fixtures in one! (5 CCT options and 2 lumen outputs)
• Five color temperatures in each fixture (2700K, 3000K, 3500K, 4000K or 5000K)
• Two lumen outputs in each fixture (275lm or 475lm per foot)
• Edge lit design eliminates LED diode image
• Built-in on/off rocker switch
• Linkable up to 400 Watts fixtures
• 3 wire grounded electrical port on both ends for power or linking
• Quick connect stab-in connectors included
• Captive Screws for easy mounting
• Integral dimmable driver

Electrical
• Input Voltage: 120V
• Lumens: 275lm or 475lm per foot (field selectable)
• Color Temperature: Selectable CCT: 2700K / 3000K / 3500K / 4000K / 5000K (Note: Preset to 3000K)
• Color Rendering Index: 90+ CRI
• Operating Temp.: 0°C to 45°C ambient temperature
• Maximum Run Length: 400W
• Dimming: Triac or ELV

Construction
• Housing: Rear wireway access cover with stab-in electrical connectors facilitate wiring without opening the fixture. Additional knock-outs for top and back wiring.
• Installation: Mounting hardware is included with each unit. Captive screws allow for quick installation, simply wire using rear door and quick connects, and hold in place and drive captive screws into material. Captives screws are covered with an included cap for a beautiful finished look.
• Included with every fixture: Mounting Hardware and 1/2" die-cast metallic cable clamp, end to end connector, lumen output switch and color temperature switch.

For more information, Click Here - PDF

For Nora Lighting undercabinet brochure, Click Here - PDF
For installation instructions, Click Here - PDF
Please contact us for any additional options seen on specification sheet.