Nora Lighting NT-302W 4 Ft. One-Circuit Track, 120V, 2400W, White

Features
• Low profile, extruded aluminum track with 20-Amp rated flat, solid integral conductors
• Variety of connectors and accessory parts available
• Note: Nora Track is not approved for use with remote transformers. Low voltage fixtures require a transformer for each fixture, can be purchased as a separate item or a fixture with transformer included.

Specification
• Extrusion: 0.030 die cast aluminum construction with 0.045 PVC insulators holding 12-gauge flat conductor wiring. Polarity groove is located on face of track to indicate location of grounding conductor.
• Polarity Groove: Each track section includes a groove on the surface of the extrusion. This groove must be continous throughout the track run. Track heads also have a polarity groove, which must coincide with the track's polarity groove.
• Mounting: The track may be surface, stem, or cable mounted. All lengths of track can be field cut. Surface mounting hardware included with each track section.
• Compatibility: Nora track system is compatible with Halo, Catalina, Hampton Bay, Halo-Edison, or any other brand configured to Halo 3-wire track configuration. Note: Wands and monopoint canopies are generally not compatible with other manufacturers.

Electrical
• Input Voltage: 120V
• Wattage: 2400W
• Dimming: Nora track may be dimmed with any approved incandescent, magnetic low voltage, or electronic low voltage controls, depending on the track fixtures being used

Listing
• cULus Listed for Dry Locations

For more information, Click Here - PDF

For installation instructions, Click Here - PDF
Please contact us for any additional options seen on specification sheet.