Features
• Large tapswitch with a rocker-style dimmer for a standard designer wallplate opening
• Advanced dimming technology designed for compatibility with a broader range of high-efficacy bulbs
• UL Listed to control:
- Dimmable LED with integrated driver
- Electronic Low-Voltage (ELV)
- Magnetic Low-Voltage (MLV)
- Dimmable compact fluorescent lamps (CFLs) with integrated ballast
- Incandescent and halogen
- Philips Advance Mark 10 ballasts
- Hi-lume 1% 2-Wire (LTE) LED driver
• Low-end adjustment to accommodate a wide range of bulbs
• Can be used in single-pole or in multi-location (using MA-R) applications
• Coordinating Claro and stainless steel wallplates available separately
• 100% factory-tested
Specifications
• 120 V~ 50 / 60 Hz
• Maximum Load
- 250 W Dimmable LED
- 500 W incandescent / halogen / ELV
- 400 VA MLV
- 20 Lutron Hi-lume 1% 2-Wire (LTE) LED drivers
- Mixed bulb type
• UL Listed to U.S. and Canadian safety requirements (UL 1472 / CSA C22.2 184.1)
• NOM
• NEMA SSL-7A-2015 forward phase compliant
• For indoor use only
• Operating temperatures 32 °F (0 °C) to 104 °F (40 °C)
• Relative humidity: 0% to 90% non-condensing
Performance
• Power failure memory: Should power be interrupted, the control will return to its previous state when power is restored
• Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
• Tested to withstand electrostatic discharge without damage or memory loss
• For 3-way and 4-way dimming, use Maestro companion dimmers. One dimmer can be used with up to 9 multi-location companion dimmers
• Total multi-location wire length (blue wire) between all units must not exceed 150 ft (45 m)
• Includes a Front Accessible Service Switch (FASS) for safe bulb replacement
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Large tapswitch with a rocker-style dimmer for a standard designer wallplate opening
• Advanced dimming technology designed for compatibility with a broader range of high-efficacy bulbs
• UL Listed to control:
- Dimmable LED with integrated driver
- Electronic Low-Voltage (ELV)
- Magnetic Low-Voltage (MLV)
- Dimmable compact fluorescent lamps (CFLs) with integrated ballast
- Incandescent and halogen
- Philips Advance Mark 10 ballasts
- Hi-lume 1% 2-Wire (LTE) LED driver
• Low-end adjustment to accommodate a wide range of bulbs
• Can be used in single-pole or in multi-location (using MA-R) applications
• Coordinating Claro and stainless steel wallplates available separately
• 100% factory-tested
Specifications
• 120 V~ 50 / 60 Hz
• Maximum Load
- 250 W Dimmable LED
- 500 W incandescent / halogen / ELV
- 400 VA MLV
- 20 Lutron Hi-lume 1% 2-Wire (LTE) LED drivers
- Mixed bulb type
• UL Listed to U.S. and Canadian safety requirements (UL 1472 / CSA C22.2 184.1)
• NOM
• NEMA SSL-7A-2015 forward phase compliant
• For indoor use only
• Operating temperatures 32 °F (0 °C) to 104 °F (40 °C)
• Relative humidity: 0% to 90% non-condensing
Performance
• Power failure memory: Should power be interrupted, the control will return to its previous state when power is restored
• Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
• Tested to withstand electrostatic discharge without damage or memory loss
• For 3-way and 4-way dimming, use Maestro companion dimmers. One dimmer can be used with up to 9 multi-location companion dimmers
• Total multi-location wire length (blue wire) between all units must not exceed 150 ft (45 m)
• Includes a Front Accessible Service Switch (FASS) for safe bulb replacement
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
