Application
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 120V 75W Max PAR20/PAR30 MED E26 40W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Trim is secured with torsion wing springs/standard coil springs
• Designed to be installed in existing sheet rock ceilings via ceiling cut out (above ceiling access is not required)
Mounting
• Housing suitable for existing or new construction installations
• Supplied with high tension remodeling clips, designed to secure the housing to an existing sheetrock ceiling for fast and easy installation
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired aluminum Junction Box, suitable for through branch wiring for a maximum of (4) #12 AWG wires
• Furnished with (2) 3/4" knock-outs
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• IC rated for 12W led or lower
• Non-IC rated for more than 12W (housing must be kept 3" from insulation)
Safety Label
• UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations
• NYC approved: Calendar #41937
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 120V 75W Max PAR20/PAR30 MED E26 40W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Trim is secured with torsion wing springs/standard coil springs
• Designed to be installed in existing sheet rock ceilings via ceiling cut out (above ceiling access is not required)
Mounting
• Housing suitable for existing or new construction installations
• Supplied with high tension remodeling clips, designed to secure the housing to an existing sheetrock ceiling for fast and easy installation
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired aluminum Junction Box, suitable for through branch wiring for a maximum of (4) #12 AWG wires
• Furnished with (2) 3/4" knock-outs
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• IC rated for 12W led or lower
• Non-IC rated for more than 12W (housing must be kept 3" from insulation)
Safety Label
• UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations
• NYC approved: Calendar #41937
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
