Application
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 120V 75W Max PAR30/PAR20 MED E26 40W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Housing provides an adjustale socket plate which allows for use of different lamp types
• Trim is secured with torsion wing springs
Mounting
• Housing suitable for new construction installations only, supplied with (2) 24" adjustable hanger bars with 90 degrees repositioning ability
• Hanger bars equipped with nail-less install 3/4" serrated barbed studs and with captive nails, for faster and easier secure mounting in wood joists
• Set-screws lock into position and prevent shifting after installation
• Earthquake structural cable compatible for drop panel ceiling or any other mounting that requires direct support from structural ceilings
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires
• Furnished with (7) 3/4" and (4) Romex knock-outs
• Strain clamps to install or remove covers for easy access and ground wire
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• Non-IC rated housing must be kept 3" from insulation
Airflow
• Airtight option is designed to restrict air flow from room into plenums in compliance to the WSEC - Washington State Energy Code (less than 2.0 CFM)
• Complies to Title 24 air flow requirements
Label
• cETL Listed
• UL Listed
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 120V 75W Max PAR30/PAR20 MED E26 40W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Housing provides an adjustale socket plate which allows for use of different lamp types
• Trim is secured with torsion wing springs
Mounting
• Housing suitable for new construction installations only, supplied with (2) 24" adjustable hanger bars with 90 degrees repositioning ability
• Hanger bars equipped with nail-less install 3/4" serrated barbed studs and with captive nails, for faster and easier secure mounting in wood joists
• Set-screws lock into position and prevent shifting after installation
• Earthquake structural cable compatible for drop panel ceiling or any other mounting that requires direct support from structural ceilings
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires
• Furnished with (7) 3/4" and (4) Romex knock-outs
• Strain clamps to install or remove covers for easy access and ground wire
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• Non-IC rated housing must be kept 3" from insulation
Airflow
• Airtight option is designed to restrict air flow from room into plenums in compliance to the WSEC - Washington State Energy Code (less than 2.0 CFM)
• Complies to Title 24 air flow requirements
Label
• cETL Listed
• UL Listed
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
