Application
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 120V 75W Max PAR20/PAR30 MED E26 40W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Housing provides an adjustable socket plate which allows for use of different lamp types
• Trim is secured with torsion wing springs/standard coil springs
• Designed to be installed in existing sheet rock ceilings via ceiling cut out (above ceiling access is not required)
Mounting
• Housing suitable for existing or new construction installations
• Supplied with high tension remodeling clips, designed to secure the housing to an existing sheetrock ceiling for fast and easy installation
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires
• Furnished with 3/4", 1" and Romex knock-outs
• Strain clamps to install or remove covers for easy access and ground wire
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• IC rated housing rated for direct contact with low to medium density loosefill blown and rolled insulation
• For use with high density loose fill blown insulation, reduce rated lamp wattage accordingly (roughly 15%-20%)
Safety Label
• UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations
• NYC approved: Calendar #41937
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 120V 75W Max PAR20/PAR30 MED E26 40W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Housing provides an adjustable socket plate which allows for use of different lamp types
• Trim is secured with torsion wing springs/standard coil springs
• Designed to be installed in existing sheet rock ceilings via ceiling cut out (above ceiling access is not required)
Mounting
• Housing suitable for existing or new construction installations
• Supplied with high tension remodeling clips, designed to secure the housing to an existing sheetrock ceiling for fast and easy installation
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires
• Furnished with 3/4", 1" and Romex knock-outs
• Strain clamps to install or remove covers for easy access and ground wire
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• IC rated housing rated for direct contact with low to medium density loosefill blown and rolled insulation
• For use with high density loose fill blown insulation, reduce rated lamp wattage accordingly (roughly 15%-20%)
Safety Label
• UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations
• NYC approved: Calendar #41937
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
