Application
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 75W PAR30/R30, 50W R20/PAR20, 75W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Housing provides an adjustale socket plate which allows for use of different lamp types
• Trim is secured with torsion wing springs
Mounting
• Housing suitable for new construction installations only, supplied with (2) 24" adjustable hanger bars with 90 degrees repositioning ability
• Hanger bars equipped with nail-less install 3/4" serrated barbed studs and with captive nails, for faster and easier secure mounting in wood joists
• Set-screws lock into position and prevent shifting after installation
• Earthquake structural cable compatible for drop panel ceiling or any other mounting that requires direct support from structural ceilings
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires
• Furnished with (7) 3/4" and (4) Romex knock-outs
• Strain clamps to install or remove covers for easy access and ground wire
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• IC rated housing rated for direct contact with low to medium density loosefill blown and rolled insulation
• For use with high density loosefill blown insulation, reduce rated lamp wattage accordingly (roughly 15%-20%)
Airflow
• Airtight option is designed to restrict air flow from room into plenums in compliance to the WSEC - Washington State Energy Code (less than 2.0 CFM)
• Complies to Title 24 air flow requirements
Safety Label
• UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations
• NYC approved: Calendar #41937
Label
• cETL Listed
• UL Listed
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• General purpose recessed downlight housing for low to medium height ceilings for residential and light commercial applications
• A variety of trims, compatible styles and finishes are available to achieve the desired decor and illumination
Lamp
• 75W PAR30/R30, 50W R20/PAR20, 75W A19
Housing
• Pre-wired housing adjusts up to a 1 1/4" ceiling thickness
• Integral thermal protector to guard against improper lamping and installation
• Housing provides an adjustale socket plate which allows for use of different lamp types
• Trim is secured with torsion wing springs
Mounting
• Housing suitable for new construction installations only, supplied with (2) 24" adjustable hanger bars with 90 degrees repositioning ability
• Hanger bars equipped with nail-less install 3/4" serrated barbed studs and with captive nails, for faster and easier secure mounting in wood joists
• Set-screws lock into position and prevent shifting after installation
• Earthquake structural cable compatible for drop panel ceiling or any other mounting that requires direct support from structural ceilings
Socket
• Standard porcelain medium screw base socket with high temperature leads
Junction Box
• 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a maximum of (8) #12 AWG wires
• Furnished with (7) 3/4" and (4) Romex knock-outs
• Strain clamps to install or remove covers for easy access and ground wire
• Equipped with safety standard fitting for flex-conduit
Insulation Contact
• IC rated housing rated for direct contact with low to medium density loosefill blown and rolled insulation
• For use with high density loosefill blown insulation, reduce rated lamp wattage accordingly (roughly 15%-20%)
Airflow
• Airtight option is designed to restrict air flow from room into plenums in compliance to the WSEC - Washington State Energy Code (less than 2.0 CFM)
• Complies to Title 24 air flow requirements
Safety Label
• UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations
• NYC approved: Calendar #41937
Label
• cETL Listed
• UL Listed
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
