Housing
• Single wall formed aluminum construction
• Openings are gasketed for AIR-TITE installation
• 5 1/2" height allows use in 2" x 6" joist construction
• AIR-TITE aperture gasket is pre-installed
Mounting
• Four remodel clips secure housing and accommodate 1/2" and 5/8" ceiling material
Junction Box
• Six 1/2" trade size conduit knockouts with true pry-out slots
• All leads are #18AWG Wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads
• Accepts a wide range of non-metallic sheathed cables
- The standard cable types used in lighting in both U.S. and Canada
- Allows wiring connections to be made outside the junction box
LED Module Connection
• EnVision's 6" modules simply install with a plug-in 120/277V line voltage wiring connector (UL and CSA Listed Luminaire Disconnect)
• The LED quick-connect pre the high efficacy rating of the luminaire
Compliance
• Use with designated EnVision LED modules for Energy Star qualification
• Can be used for State of California Title 24 high efficacy compliance with designated LED modules JA8
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance with designated LED module
Qualification
• IC and Airtight Can Certified under ASTM-E283 and listed UL/cUL 1598
• May be used to meet insulated ceiling and restricted air-flow requirements such as:
- Washington State Energy Code
- International Energy Conservation Code (IECC)
- New York State Energy Conservation Construction Code (NY-ECCC)
- State of California Title 24 "Recessed Luminaires in Insulated Ceilings"
- Not to be used in direct contact with spray foam insulation
UL Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location, with select trims
• UL/cUL listed for Direct Contact with insulation and combustible material
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Single wall formed aluminum construction
• Openings are gasketed for AIR-TITE installation
• 5 1/2" height allows use in 2" x 6" joist construction
• AIR-TITE aperture gasket is pre-installed
Mounting
• Four remodel clips secure housing and accommodate 1/2" and 5/8" ceiling material
Junction Box
• Six 1/2" trade size conduit knockouts with true pry-out slots
• All leads are #18AWG Wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads
• Accepts a wide range of non-metallic sheathed cables
- The standard cable types used in lighting in both U.S. and Canada
- Allows wiring connections to be made outside the junction box
LED Module Connection
• EnVision's 6" modules simply install with a plug-in 120/277V line voltage wiring connector (UL and CSA Listed Luminaire Disconnect)
• The LED quick-connect pre the high efficacy rating of the luminaire
Compliance
• Use with designated EnVision LED modules for Energy Star qualification
• Can be used for State of California Title 24 high efficacy compliance with designated LED modules JA8
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance with designated LED module
Qualification
• IC and Airtight Can Certified under ASTM-E283 and listed UL/cUL 1598
• May be used to meet insulated ceiling and restricted air-flow requirements such as:
- Washington State Energy Code
- International Energy Conservation Code (IECC)
- New York State Energy Conservation Construction Code (NY-ECCC)
- State of California Title 24 "Recessed Luminaires in Insulated Ceilings"
- Not to be used in direct contact with spray foam insulation
UL Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location, with select trims
• UL/cUL listed for Direct Contact with insulation and combustible material
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
