Features
• Wired for 0-10V Dimming
• Single Wall IC Airtight rated for direct contact with insulation
• 120/277V Input
• Meets restricted air flow requirements (per ASTM E-283)
• UL listed for direct contact with insulation
• UL listed for wet locations with wet location inserts
• UL listed for feed through
• CA Title 24 compliant
Construction
• Shallow Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Steel housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller joists are used
• Maximum hole cutout is 6 1/2"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out slots
• 4 Romex pryouts with strain relief
Electrical
• Input Voltage: 120/277V
• Inherently protected
Trims
• Compatible with ELCO 6" 0-10V LED Inserts and 0-10V Koto Module
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Wired for 0-10V Dimming
• Single Wall IC Airtight rated for direct contact with insulation
• 120/277V Input
• Meets restricted air flow requirements (per ASTM E-283)
• UL listed for direct contact with insulation
• UL listed for wet locations with wet location inserts
• UL listed for feed through
• CA Title 24 compliant
Construction
• Shallow Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Steel housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller joists are used
• Maximum hole cutout is 6 1/2"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out slots
• 4 Romex pryouts with strain relief
Electrical
• Input Voltage: 120/277V
• Inherently protected
Trims
• Compatible with ELCO 6" 0-10V LED Inserts and 0-10V Koto Module
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
