Features
• Single wall IC airtight housing for use in insulated ceilings
• Flicker free LED dimming
• Trims and inserts sold separately, MR16 LED with PSA37 or 3" insert
Lamp
• Designed for use with Elco 3" LED inserts, LED modules, or PSA37 with 3" MR16 trims
Construction
• Single wall IC Rated for direct contact with insulation
• For use in IC and Non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Steel housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller are used
• High strength hanger bars can easily be nailed to joists
• Maximum hole cutout is 3 5/8"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts
• Pry-out knockout slots
• 4 Romex pryouts with strain relief
Hanger Bars
• Pre Installed hanger bars with True Nail easy installation in regular lumber, engineered lumber, and laminated beams
• Integral T-bar slots for easy installation in T-Bars
• Spans up 24" and can be repositioned 90°
• Score lines allow for tool-free hanger bar size reduction
• Integral leveling flange allows for single-person installation while easily aligning the housings with the joists
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Single wall IC airtight housing for use in insulated ceilings
• Flicker free LED dimming
• Trims and inserts sold separately, MR16 LED with PSA37 or 3" insert
Lamp
• Designed for use with Elco 3" LED inserts, LED modules, or PSA37 with 3" MR16 trims
Construction
• Single wall IC Rated for direct contact with insulation
• For use in IC and Non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Steel housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller are used
• High strength hanger bars can easily be nailed to joists
• Maximum hole cutout is 3 5/8"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size conduit knockouts, four 3/4" knockouts
• Pry-out knockout slots
• 4 Romex pryouts with strain relief
Hanger Bars
• Pre Installed hanger bars with True Nail easy installation in regular lumber, engineered lumber, and laminated beams
• Integral T-bar slots for easy installation in T-Bars
• Spans up 24" and can be repositioned 90°
• Score lines allow for tool-free hanger bar size reduction
• Integral leveling flange allows for single-person installation while easily aligning the housings with the joists
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
