Features
• Single wall IC construction, for use in insulated or non-insulated ceilings
• Flicker free LED dimming
• Lamp: MR16 GU/GX5.3 bi-pin LED (not included)
• Lamp Holder: MR16 GU/GX5.3 bi-pin socket
Construction
• IC rated for direct contact with insulation, for use in IC or non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Aluminum housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller are used
• High strength hanger bars can easily be nailed to joists
• Maximum hole cutout is 3 3/4"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size pryout conduit knockouts, 4 Romex pryouts with strain relief
Hanger Bars
• Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams
• Integral T-bar slots for easy installation in T-grids
• Spans up to 24" and can be repositioned 90°
• Score lines allow for tool-free hanger bar size reduction
• Integral leveling flange allows for single-person installation while aligning the housing with the joists
Electrical
• Input Voltage: 120V AC
• Output Voltage: 12V AC
• Maximum Wattage: 12W
• Thermally protected against improper lamping
Trims
• Compatible with Elco Low Voltage MR16 trims
Dimmability
• Electronic transformer dims with ELV type dimmers
Lamp
• Designed for use with GU5.3 MR16 lamps
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Single wall IC construction, for use in insulated or non-insulated ceilings
• Flicker free LED dimming
• Lamp: MR16 GU/GX5.3 bi-pin LED (not included)
• Lamp Holder: MR16 GU/GX5.3 bi-pin socket
Construction
• IC rated for direct contact with insulation, for use in IC or non-IC conditions
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements
• Aluminum housing for greater heat dissipation
• Stamped galvanized steel frame
Installation
• Designed for ceiling plenums where 2x6 joists or taller are used
• High strength hanger bars can easily be nailed to joists
• Maximum hole cutout is 3 3/4"
• Suitable for T-grid and drop ceiling applications
Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2" trade size pryout conduit knockouts, 4 Romex pryouts with strain relief
Hanger Bars
• Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams
• Integral T-bar slots for easy installation in T-grids
• Spans up to 24" and can be repositioned 90°
• Score lines allow for tool-free hanger bar size reduction
• Integral leveling flange allows for single-person installation while aligning the housing with the joists
Electrical
• Input Voltage: 120V AC
• Output Voltage: 12V AC
• Maximum Wattage: 12W
• Thermally protected against improper lamping
Trims
• Compatible with Elco Low Voltage MR16 trims
Dimmability
• Electronic transformer dims with ELV type dimmers
Lamp
• Designed for use with GU5.3 MR16 lamps
Listings
• UL Listed for Damp Location
• UL Listed for Wet Location with select trims
• UL Listed for Feed Through
• UL Listed for Direct Contact with Insulation and Combustible Material
• Airtight per ASTM E-283
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
