Features
• Polycarbonate Housing with Polyamide Fasteners
• Easily installs to wall surfaces
• Bright and even Exit Sign illumination
• LEDs with a 10 year life-cycle
• Snap-in arrows for directional indication
• 120/277 VAC input
• AC-On LED and Push-to-Test switch
• Long-Life Nickel Metal Hydride Battery
Application
• The EVE4X is designed for indoor or outdoor wet or dusty environments requiring corrosion resistant, UL50 type 4X exit signs with energy-saving, long-life LEDs
• Available in AC only or emergency operation which includes a nickel metal hydride (NiMH) battery and provides a full 90 minutes of emergency exit illumination in the event of power failure
• Includes a constant current charger
• The EVE4X accepts 120/277VAC input at 60Hz with a self-diagnostic option
Construction
• The EVE4X Series enclosure and cover is constructed of impact-resistant Polycarbonate with light gray color
• The cover is secured to the housing by means of four polyamide screws
• A polyurethane gasket provides a watertight and dust-tight seal
• A white trim plate installs under the housing cover
• Directional arrows are snap-in chevron type
Installation
• EVE4X Series exit signs are designed to mount to the wall through four 1/4" integral mounting holes in the unit housing
• Mounting hardware is supplied by others
• Units must be surface wired for utility power input
• Housings are easily drilled or punched to accept sealed conduit hubs (supplied by others)
Illumination
• The EVE4X series provides bright and uniform exit panel illumination by using energy saving, long-life LEDs with a 10 year lifecycle
• The panel face exceeds UL924 requirements for brightness and uniformity
Compliances
• Listed and Labeled to UL 924 Wet Location and UL Type 4X
• Listed to UL924 Standard
• NFPA 101 (Life Safety Code)
• NFPA 70 (National Electrical Code)
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Polycarbonate Housing with Polyamide Fasteners
• Easily installs to wall surfaces
• Bright and even Exit Sign illumination
• LEDs with a 10 year life-cycle
• Snap-in arrows for directional indication
• 120/277 VAC input
• AC-On LED and Push-to-Test switch
• Long-Life Nickel Metal Hydride Battery
Application
• The EVE4X is designed for indoor or outdoor wet or dusty environments requiring corrosion resistant, UL50 type 4X exit signs with energy-saving, long-life LEDs
• Available in AC only or emergency operation which includes a nickel metal hydride (NiMH) battery and provides a full 90 minutes of emergency exit illumination in the event of power failure
• Includes a constant current charger
• The EVE4X accepts 120/277VAC input at 60Hz with a self-diagnostic option
Construction
• The EVE4X Series enclosure and cover is constructed of impact-resistant Polycarbonate with light gray color
• The cover is secured to the housing by means of four polyamide screws
• A polyurethane gasket provides a watertight and dust-tight seal
• A white trim plate installs under the housing cover
• Directional arrows are snap-in chevron type
Installation
• EVE4X Series exit signs are designed to mount to the wall through four 1/4" integral mounting holes in the unit housing
• Mounting hardware is supplied by others
• Units must be surface wired for utility power input
• Housings are easily drilled or punched to accept sealed conduit hubs (supplied by others)
Illumination
• The EVE4X series provides bright and uniform exit panel illumination by using energy saving, long-life LEDs with a 10 year lifecycle
• The panel face exceeds UL924 requirements for brightness and uniformity
Compliances
• Listed and Labeled to UL 924 Wet Location and UL Type 4X
• Listed to UL924 Standard
• NFPA 101 (Life Safety Code)
• NFPA 70 (National Electrical Code)
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
