Features
• Class 1, Division 2, Class 2, Division 1 Certified
• High lumen
• High mounting height
• 90 minute full lumen output
• Single-phase
• Wet location application
• Long-Life Lithium Iron Phosphate Battery
• Matching remote heads
Application
• Highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes illumination when primary power is lost
• Includes micro-controller based 3-stage charger and Lithium Iron Phosphate (LiFePO4) battery
• Specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment
Construction
• Flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish
• The DYN series housing, covers, remote housing and shield are made of polycarbonate
• Lamp-heads are made of die-cast aluminum for thermal dissipation
• LED lenses are made of polycarbonate
Installation
• Includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall
• Special bracket included to ensure positive pole gripping when using bands
• In wet or NEMA 4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit
• The DYN Series accepts 120 through 277VAC input at 50 or 60Hz
• Not designed for self-diagnostic operation at 220-240VAC input
• Universal mounting plate made of painted stamped steel
Illumination
• Provides bright and uniform illumination and is specifically designed for higher mounting heights above 9'
• Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each
• LEDs are located in a specially designed, heat dissipating, fully adjustable lamp-head which can be locked into position
• Designed for full lumen output across the entire 90 minutes of operation to ensure maximum visibility of the egress path over the full 90 minute discharge period
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
• Class 1, Division 2, Class 2, Division 1 Certified
• High lumen
• High mounting height
• 90 minute full lumen output
• Single-phase
• Wet location application
• Long-Life Lithium Iron Phosphate Battery
• Matching remote heads
Application
• Highly versatile superior lumen output, industrial application emergency lighting unit, designed to provide a minimum of 90 minutes illumination when primary power is lost
• Includes micro-controller based 3-stage charger and Lithium Iron Phosphate (LiFePO4) battery
• Specifically designed for demanding environments, high reliability operation in industrial settings such as wet location or hose-down, food processing, food storage, production facilities, chemical plant, and wastewater treatment
Construction
• Flame-rated, UV stable thermoplastic housing which is fully gasketed and corrosion resistant with a gray finish
• The DYN series housing, covers, remote housing and shield are made of polycarbonate
• Lamp-heads are made of die-cast aluminum for thermal dissipation
• LED lenses are made of polycarbonate
Installation
• Includes a universal mounting plate which facilitates mounting to a truss or I-beam, pole, column, or wall
• Special bracket included to ensure positive pole gripping when using bands
• In wet or NEMA 4X applications, use UL listed water tight conduit fittings that meet the requirements of the UL 514B Standard for Conduit Tubing and Cable Fittings when using knockouts on the side or top of unit
• The DYN Series accepts 120 through 277VAC input at 50 or 60Hz
• Not designed for self-diagnostic operation at 220-240VAC input
• Universal mounting plate made of painted stamped steel
Illumination
• Provides bright and uniform illumination and is specifically designed for higher mounting heights above 9'
• Coverage provided by 2 sealed aluminum lamp-heads using 3 high power LEDs each
• LEDs are located in a specially designed, heat dissipating, fully adjustable lamp-head which can be locked into position
• Designed for full lumen output across the entire 90 minutes of operation to ensure maximum visibility of the egress path over the full 90 minute discharge period
For more information, Click Here - PDF
Please contact us for any additional options seen on specification sheet.
